UHF Transceiver - C3S
C3S Electronics Development
Click 'Get Pricing' to add this to a quote and access pricing information. After submission, get a response within 3 business days.
EnduroSat's UHF Transceiver II is a highly reliable half-duplex communication module fully compliant with the CubeSat standard. Featuring on-orbit configurable data rates, output power customization and multiple modulation schemes with main applications for Telemetry and Telecommand. UHF Transceiver II has flight heritage.
Features:
- Half-duplex
- Ultra-low power MCU with FRAM
- Local and remote (in-flight) secured application firmware update
- Configurable AX.25 telemetry beacon broadcast, Morse Code, Audio Beacon
Includes:
- Packed in a custom box
- 5 hours of engineering support
- Full warranty
- Technical information (Datasheet)
Qualification:
Space qualification tests are performed on the Qualification Engineering Model. Qualification test levels and duration will follow the ESA standard ECSS-E-ST-10-03C and GEVS: GSFC-STD-7000A.
- Frequency Range:
- 400 to 403 MHz or 430 to 440 MHz
- Modulation:
- 2GFSK
- Modulation:
- OOK
- Modulation:
- GMSK
- Modulation:
- 2FSK
- Modulation:
- 4FSK
- Modulation:
- 4GFSK
- Typical Tx Power:
- 1 W
- Power Amplifier Efficiency:
- > 70%
- Frequency Stability:
- +/- 2.5 ppm
- Typical Consumption during receive mode:
- 25 mA @ 3.3 V
- Data Rate:
- up to 19.2 kbps
- Sensitivity:
- up to 121 dBm
- Interface:
- SPI (RS485)
- Interface:
- UART
- Interface:
- I2C
- Interface:
- USB
- Interface:
- CAN
- Mass:
- 94 g
- Half-duplex
- Ultra-low power MCU with FRAM
- Local and remote (in-flight) secured application firmware update
- Configurable AX.25 telemetry beacon broadcast, Morse Code, Audio Beacon
- Packed in a custom box
- 5 hours of engineering support
- Full warranty
- Technical information (Datasheet)
EnduroSat's UHF Transceiver II is a highly reliable half-duplex communication module fully compliant with the CubeSat standard. Featuring on-orbit configurable data rates, output power customization and multiple modulation schemes with main applications for Telemetry and Telecommand. UHF Transceiver II has flight heritage.
Features:
Includes:
Qualification:
Space qualification tests are performed on the Qualification Engineering Model. Qualification test levels and duration will follow the ESA standard ECSS-E-ST-10-03C and GEVS: GSFC-STD-7000A.
Related Products
-
-
UHF/VHF Duplex Transceiver
ISISpace
-
Murgas – The UHF/VHF transceiver
Spacemanic
-
EnduroSat UHF Antenna
EnduroSat
