- Type:
- Earth Observation
- Sensor Technology:
- CMOS
- Sensor type:
- Global Shutter
- Resolution:
- 9344 x 7000 pixels
- Pixel Size:
- 3.2 µm
- Pixel Depth:
- 10-bit
- Maximum Frame Rate:
- 30 fps
- Storage Capacity:
- 128 GB
- Ground Sampling Distance:
- 1.5 m (at 500km orbit)
- Ground Swath:
- 14 km by 10.5 km (at 500km orbit)
- Maximum Power Consumption:
- 5.8 W
- Typical Power Consumption:
- 2.5 W
- Mass:
- 12.1 kg
- Dimensions:
- 216 x 216 x 304 mm
- Supply Voltage:
- 5 VDC
- 65-megapixels (9344 x 7000)
- 10-bit pixel depth
- Up to 30 full resolution frames per second
- 1.5 m GSD (at 500 km orbit height)
- Ground footprint equal to 14 km x 10.5 km (at 500 km orbit height)
- Integrated RGB Bayer filter in the visible spectral range
- 128 Gigabyte non-volatile storage capacity for over 1000 full resolution image frames
- On-board image processing and compression capabilities (optional)
- Comprehensive telemetry and health monitoring including OFE temperature measurement
- Latch-up current monitoring and optional on-board power switch with quick turn-off
- Inject AOCS/ADCS parameters and time information into data stream
- Expected lifetime of more than five years
- For more technical details see Documents tab below
- Emergency management
- Mapping & geographic information systems
- Land use
- Business intelligence
- Infrastructure monitoring
The TriScape200 is enabling change monitoring applications at an extraordinary resolution in a CubeSat form factor. The engineering team based the designed on a 65.4-megapixel RGB CMOS image sensor. This imager is ideal for real-time high definition video and push-frame imaging from space.
Features:
Applications:
The signal-to-noise ratio for a selection of integration times, at an orbit height of 500 km, is shown in the Figure below, at. A radiance level of 100 W·m-2·sr-1·µm-1 is assumed acrossthe spectral range for all of the SNR values. The figure also shows the relative through-system efficiency of the three spectral bands inclusive of sensor quantum efficiency (QE), lens transmittance and NIR blocking filter transmittance.
Figure: SNR and Spectral efficiency.
TriScape200
Simera SenseThe TriScape200 is enabling change monitoring applications at an extraordinary resolution in a CubeSat form factor. The engineering team based the designed on a 65.4-megapixel RGB CMOS image sensor. This imager is ideal for real-time high definition video and push-frame imaging from space.
Features:
- 65-megapixels (9344 x 7000)
- 10-bit pixel depth
- Up to 30 full resolution frames per second
- 1.5 m GSD (at 500 km orbit height)
- Ground footprint equal to 14 km x 10.5 km (at 500 km orbit height)
- Integrated RGB Bayer filter in the visible spectral range
- 128 Gigabyte non-volatile storage capacity for over 1000 full resolution image frames
- On-board image processing and compression capabilities (optional)
- Comprehensive telemetry and health monitoring including OFE temperature measurement
- Latch-up current monitoring and optional on-board power switch with quick turn-off
- Inject AOCS/ADCS parameters and time information into data stream
- Expected lifetime of more than five years
- For more technical details see Documents tab below
Applications:
- Emergency management
- Mapping & geographic information systems
- Land use
- Business intelligence
- Infrastructure monitoring
The signal-to-noise ratio for a selection of integration times, at an orbit height of 500 km, is shown in the Figure below, at. A radiance level of 100 W·m-2·sr-1·µm-1 is assumed acrossthe spectral range for all of the SNR values. The figure also shows the relative through-system efficiency of the three spectral bands inclusive of sensor quantum efficiency (QE), lens transmittance and NIR blocking filter transmittance.
Figure: SNR and Spectral efficiency.
- Type:
- Earth Observation
- Sensor Technology:
- CMOS
- Sensor type:
- Global Shutter
- Resolution:
- 9344 x 7000 pixels
- Pixel Size:
- 3.2 µm
- Pixel Depth:
- 10-bit
- Maximum Frame Rate:
- 30 fps
- Storage Capacity:
- 128 GB
- Ground Sampling Distance:
- 1.5 m (at 500km orbit)
- Ground Swath:
- 14 km by 10.5 km (at 500km orbit)
- Maximum Power Consumption:
- 5.8 W
- Typical Power Consumption:
- 2.5 W
- Mass:
- 12.1 kg
- Dimensions:
- 216 x 216 x 304 mm
- Supply Voltage:
- 5 VDC
- 65-megapixels (9344 x 7000)
- 10-bit pixel depth
- Up to 30 full resolution frames per second
- 1.5 m GSD (at 500 km orbit height)
- Ground footprint equal to 14 km x 10.5 km (at 500 km orbit height)
- Integrated RGB Bayer filter in the visible spectral range
- 128 Gigabyte non-volatile storage capacity for over 1000 full resolution image frames
- On-board image processing and compression capabilities (optional)
- Comprehensive telemetry and health monitoring including OFE temperature measurement
- Latch-up current monitoring and optional on-board power switch with quick turn-off
- Inject AOCS/ADCS parameters and time information into data stream
- Expected lifetime of more than five years
- For more technical details see Documents tab below
- Emergency management
- Mapping & geographic information systems
- Land use
- Business intelligence
- Infrastructure monitoring
The TriScape200 is enabling change monitoring applications at an extraordinary resolution in a CubeSat form factor. The engineering team based the designed on a 65.4-megapixel RGB CMOS image sensor. This imager is ideal for real-time high definition video and push-frame imaging from space.
Features:
Applications:
The signal-to-noise ratio for a selection of integration times, at an orbit height of 500 km, is shown in the Figure below, at. A radiance level of 100 W·m-2·sr-1·µm-1 is assumed acrossthe spectral range for all of the SNR values. The figure also shows the relative through-system efficiency of the three spectral bands inclusive of sensor quantum efficiency (QE), lens transmittance and NIR blocking filter transmittance.
Figure: SNR and Spectral efficiency.