The TriScape100 is offering near real-time change monitoring at an exceptional resolution in a CubeSat form factor. This imager design is based on a 12.6 megapixel CMOS image sensor with integrated Red Green Blue (RGB) Bayer filter in the visible spectral range. The TriScape100 provides snapshot imaging with a frame rate of up to 150 fps to accommodate high-definition video.
Features:
- 12.6-megapixels (4096 x 3072)
- Up to 150 full resolution frames per second
- 4.75 m GSD (at 500 km orbit height)
- Ground footprint equal to 19.4 km x 14.6 km (at 500 km orbit height)
- Integrated RGB Bayer filter in the visible spectral range
- 128 Gigabyte non-volatile storage capacity for up to 8000 image frames
- On-board image processing and compression capabilities (optional)
- Comprehensive onboard telemetry and health monitoring
- Latch-up current monitoring and optional on-board power switch with quick turn-off
- Inject AOCS/ADCS parameters and time information into data stream
- Option to integrate pulse per second signal
- For more technical details see Documents tab below
Applications:
- Emergency management
- Precision agriculture
- Forestry and land use
- Coastal monitoring
- Resource and infrastructure monitoring
The signal-to-noise ratio for a selection of integration times is shown in the Figure below. A radiance level of 100 W·m-2·sr-1·µm-1 is assumed across the spectral range for all of the SNR values. The figure also shows the relative through-system efficiency of the three spectral bands inclusive of sensor quantum efficiency (QE), lens transmittance and NIR blocking filter transmittance.
Figure: SNR and Spectral efficiency.
- Type:
- Earth Observation
- Sensor Technology:
- CMOS
- Sensor type:
- Global Shutter
- Resolution:
- 4096 x 3072 pixels
- Pixel Size:
- 5.5 µm
- Pixel Depth:
- 10-bit
- Maximum Frame Rate:
- 150 fps
- Storage Capacity:
- 128 GB
- Mass:
- 1.1 kg
- Dimensions:
- 98 x 98 x 176 mm
- Operating Temperature:
- -10C to 50C
- Radiation Tolerance:
- Up to 15 krad
- Maximum Power Consumption:
- 5.8 W
- Typical Power Consumption:
- 2.5 W
- 12.6-megapixels (4096 x 3072)
- Up to 150 full resolution frames per second
- 4.75 m GSD (at 500 km orbit height)
- Ground footprint equal to 19.4 km x 14.6 km (at 500 km orbit height)
- Integrated RGB Bayer filter in the visible spectral range
- 128 Gigabyte non-volatile storage capacity for up to 8000 image frames
- On-board image processing and compression capabilities (optional)
- Comprehensive onboard telemetry and health monitoring
- Latch-up current monitoring and optional on-board power switch with quick turn-off
- Inject AOCS/ADCS parameters and time information into data stream
- Option to integrate pulse per second signal
- For more technical details see Documents tab below
- Emergency management
- Precision agriculture
- Forestry and land use
- Coastal monitoring
- Resource and infrastructure monitoring
The TriScape100 is offering near real-time change monitoring at an exceptional resolution in a CubeSat form factor. This imager design is based on a 12.6 megapixel CMOS image sensor with integrated Red Green Blue (RGB) Bayer filter in the visible spectral range. The TriScape100 provides snapshot imaging with a frame rate of up to 150 fps to accommodate high-definition video.
Features:
Applications:
The signal-to-noise ratio for a selection of integration times is shown in the Figure below. A radiance level of 100 W·m-2·sr-1·µm-1 is assumed across the spectral range for all of the SNR values. The figure also shows the relative through-system efficiency of the three spectral bands inclusive of sensor quantum efficiency (QE), lens transmittance and NIR blocking filter transmittance.
Figure: SNR and Spectral efficiency.