EnduroSat 1.5U Platform for CubeSats - Orbital Transports SmallSat Catalog

1.5U CubeSat Platform - Endurosat

The EnduroSat 1.5U CubeSat Platform is a fully integrated nanosatellite capable of supporting up to 1U (950 grams) of scientific and commercial payloads. Available with EnduroSat Attitude Determination and Control System (ADCS) with pointing accuracy up to 3 degrees and complete payload integration support, this class-leading 1.5U CubeSat is designed and qualified to NASA GEVS.

Features

  • 1x Power Module
  • 1x UHF Transceiver Type II
  • 1x Onboard Computer
  • 1x UHF Antenna
  • 1x Structure 1.5U
  • 1x 1.5U Solar Panels X/Y
  • 1x 1.5U Solar Panels X/Y RBF
  • 2x 1.5U Solar Panels X/Y MTQ
  • 1x Solar Panel Z
  • 1x Solar Panel Z MTQ
  • 2x Protoboard

Included with the product

  • Payload integration
  • Dedicated X/Y Panel with Remove-before-flight pin and system check interface
  • Software drivers
  • Cables
  • Packed in a protective case
  • Technical information (Datasheet)
  • 10 hours of engineering support
  • Full warranty

Qualification:

During the space qualification campaign, EnduroSat CubeSats underwent high level of functional tests to demonstrate the integrity of the system. All modules were performing at their nominal level. The tests were performed following the strict specifications of the ESA ECSS-E-ST-10-03C and NASA GEVS: GSFC-STD-7000A standards.

Specifications
Available Payload Volume:
97 x 97 x 108 mm
Available Mass:
approx. 950 g
Available Power:
900 mW (orbit and mission dependent)
Power Buses Voltages:
3.3/3.7 Battery raw / BCR 5V Max / 5 V
Data rate in the air:
up to 19.6 kbps
Attitude Control:
up to 3 degrees accuracy
Lifetime:
1 – 5 years (orbit dependent)
Documents